Switch User's Manual

2 GuestPass v6.0 README
NN47250-103 (321231-E Version 02.01)
Hard drive space available - 100 MB
Monitor resolution - 1024x768 pixels, 24-bit color
GuestPass is supported with the following WLAN Security Switch (WSS) models only:
- 2350
- 2360/2361
- 2380
- 2382
One or more WLAN Security Switches in the Mobility Domain must be configured with the VLAN
you plan to assign guest users to, and the SSID you want them to access. The WSS you configure
GuestPass to use must be configured with the user group you want to use for guests, as well as an
authentication rule for guests.
=====================================================================
Installation
Download and run the WLAN_2300_GuestPass_Application_6.0.zip file. An installation wizard
opens. The wizard guides you through the rest of the installation procedure.
=====================================================================
Best practices
=====================================================================
Use GuestPass in the same time zone as the WSS.
A guest account includes the dates and times during which the account will be active. The date and
time are based on the system date and time of the PC where GuestPass is running - not on the date
and time of the WSS where GuestPass deploys the account information. For best results, use
GuestPass on a PC that is in the same time zone as the WSS , and make sure the date and time on
the PC and on the WSS are correct.
=====================================================================
CAUTIONS
This version of GuestPass uses an encrypted storage and will not migrate the existing stored data
from the beta or prior release.