Manualshelf

Telephone Installation Guide

ManualsBrandsNortel Networks ManualsTelephoneFastRad
21222324252627282930
19
FastRAD Installation Guide
10. Press CHNG until the display shows the desired local serial
port baud rate (300, 1200, 2400, 4800, 9600 or 19200).
Note: To use Norstar Manager in a direct connection, the
local baud rate must be set to 9600 baud.
11. Press NEXT.
The display shows:
12. Press to end programming.
The FastRAD programming is completed. You must now test
the FastRAD to make sure it is operating properly.
RAD Admin
GEN ALARM DATA
855601 Book : 855601 Guide Page 19 Wednesday, October 29, 1997 4:06 PM