Digital Modem Installation Guide

66 AT commands
CTA 500 dm On Line Guide P0873832 Issue 05
Summary of AT commands
Command Description Value
&Fn load active profile
from factory profile
0 factory profile (default)
1 user profile
Zn load active profile
from stored profile
0 factory profile
1 user profile (default)
&Yn select profile to load
into active profile on
power-up
0 factory profile (default)
1 user profile
&W save active profile to
memory
O return to On-line
Data State
Yxxxx enter Download State XXXX=Nor*
In request identification 0 product ID (default)
1 boot software revision
2 download software
version
3 unique identifier
4 capability string
6 CTI MUX mode query
9 PnP identification string
&Vn view stored parameters 0 all profiles (default)
1 stored dial strings
4 stored Caller ID
Security list
En set echo command 0 turn echo off
1 turn echo on (default)
&Zn= save dial string locations 0-9 (default 0)
&Zn? display saved dial string locations 0-9 (default 0)
Vn verbose control 0 numeric indications
1 full indications (default)
Qn result code control 0 result codes are sent
(default)
1 result codes are
suppressed