User's Manual

Configuration 91

Nortel Networks Confidential

This example creates a general SIP server for TCP and UDP and starts

execution of two SIP server ports on network address 192.168.0.1. The

first server uses UDP/IP transport listening on port 5060. The second

server uses TCP/IP accepting connections on port 5060.

UDP=192.168.0.1:5060:hostaddr:47.249.32.64

This example creates a SIP server for UDP on all interfaces on port

5060. This must be used on all application servers that span

public/private networks.

This example creates an SSL server that can be used for secure

communications with an SSL client application.

Example

UDP=192.168.0.1:5060;TCP=192.168.0.1:5060;SSL=192

.168.0.1:7020

Note: Do not use the IP addresses from this example in your

network.

This example combines the five previous examples into one example

that shows all transport services starting together on a single SIP

server.

Note 1: Each transport specification is separated by a semicolon.

Note 2: Be sure to avoid address and port conflicts, which can cause

service startup failure, and require re-configuration and server

restart.

Retransmission Off parameter

When Retransmission Off is false, the SIP server follows the

retransmission policies identified by the RFC 2543 (see note for

specific reference) specification for SIP.

Note: J. Rosenberg et al, SIP: Session Initiation Protocol, Internet

Draft draft-ietf-sip-rfc2543-bis09.txt, IETF, Feb 27, 2002.

When Retransmission Off is true, the SIP server does not retransmit

SIP messages. This value is not changeable.

Invite Timer parameter

The Invite Timer value specifies the number of milliseconds a

non-finalized SIP Invite transaction can remain open before it is forced

closed. A SIP Invite transaction, having received a provisional

response and waiting on a final response, is allowed to persist only as