User's Manual

80 Configuration
NN10029-111 Standard MCP 1.1 FP1 (02.02) April 2003 Copyright © 2003, Nortel Networks
Nortel Networks Confidential
Label Type=string
Range=1-15 alphanumeric
characters
Default=Service_Node_Name
This is the name by which the CS
2000 knows an MCP server. This
name has to be assigned to the
service instance in the N+M
configuration so it cannot be the
node name of the platform. In
addition it must contain no special
characters like "_" or "-". It is
defined in one of two places when
the node is deployed from the
management server. If the server is
running as part of an N+M cluster
then each service instance is
defined as a service parameter in
each Network Service Description
(NSD) in the Transport
Management tab. Each NSD has to
define a unique service name. This
is done by adding a service name of
"Service_Node_Name" in the label
field and the desired node name in
the Value part.
This information must then be
datafilled in the CS 2000 as the
name and IP from the NSD.
If the system is not running the N+M
then the service name needs to be
added to the "Server Properties"
tab. This information also needs to
be entered on the CS 2000.
Value Type=string in the form of an IP
address
Range=<host name of node>
This field contains the value to
assign this label (IP address).
HeartBeat
Port
Type=integer
Range=40001
Default=40001
This is the port for all servers to use
to send or receive reliability
messages. This is a read-only field.
Sending
Interval
Type=integer
Range=50-2000 numbers
Default=250
This is the interval in milliseconds
between reliability messages.
Table 22 Transport Management tab field descriptions (Sheet 2 of 3)
Field Value Description