User's Manual

70 Configuration
NN10029-111 Standard MCP 1.1 FP1 (02.02) April 2003 Copyright © 2003, Nortel Networks
Nortel Networks Confidential
Label: Type=string
Range=N/A
Default=Private_Service_Address
This is a label that identifies the private
address for the Server. Only add an
entry for a standalone configuration.
Value: Type=string in the form of an IP
address (x.x.x.x)
This field contains the private machine
logical IP address of the SIP
Application Module assigned to the
label just above this field.
Label: Type=string
Range=1-80 characters
Default=blank
This field contains a unique label to
reference the value to the field directly
below assigned below. Enter
server.gateways. Only add an entry
for redundant configurations.
Value: Type=string
Range=1-80 characters
Default=blank
This field contains the nodes that the
software needs to check upon boot up
of this SIP Application Module. This
value is assigned to the label just
above this field.
Label: Type=string
Range=1-25 characters
Default=blank
This field contains a unique label to
reference the value. Enter
server.blade.host.label for
interworking with the RTP Media
Portal. See Table 22, “Transport
Management tab field descriptions,” on
page 79, which contains the actual
value of private_static_address. In
other words, this is where a numeric IP
address is assigned to the label
private_static_address. The label
server.blade.host.label has a value
which is another label
(private_static_address) whose value
in turn is defined in the Transport
Management tab.
Value: Type=string
Range=1-25 characters
Default=blank
This field should contain the string
private_static_address.
Table 17 Server Properties tab field descriptions (Sheet 2 of 2)
Field Value Description