User's Manual

Configuration 43
Copyright © 2003, Nortel Networks MCP SIP Application Module Basics
Nortel Networks Confidential
Module. The Adding Services Progress dialog box appears as
shown in Figure 6, “Adding Services Progress dialog box.”
Figure 6 Adding Services Progress dialog box
If the deployment is successful, an “Add successful” box
appears, as shown in Figure 7, “The Add successful dialog box.”
Figure 7 The Add successful dialog box
If the deployment is not successful, re-examine the configuration
tabs and verify that all 0.0.0.0 IP addresses have been replaced
with the correct IP address. Verify other non-default parameters
for accuracy. The SIP Application Module and all of its services
must be unlocked and enabled. There must be no alarms.
After deployment and installation, the Management Module
configures services according to values entered in the
configuration tabs during step 4.