User's Manual

42 Configuration

Nortel Networks Confidential

an example with the name SIPApp entered in the Service

Component Name field.

Figure 5 Configuration window (top half)

Note that there are a number of different tabs in the SIP

Application Module configuration window representing the

configurable services that the SIP Application Module requires.

The following sections describe each tab in detail and provide

guidance on how to configure the SIP Application Module. Many

of the fields are already filled with default values. Administrators

can leave most of the filled-in fields with their default values.

Only a few fields need customization.

Note: The parameters with asterisks (*) are mandatory. The

grayed-out fields are for information only and cannot be

changed.

Make any required modifications to any of the tabs. When you

have COMPLETED all the tabs, click on the Apply button.

6 After you click the Apply button, the Management Module

begins the deployment and installation of the SIP Application

ATTENTION

DO NOT click on Apply until you have FINISHED filling in the

fields that you need.