Computer Hardware Installation Guide

Man-Machine T1 maintenance interface software 233
Command
Description
SA
Set Alarm parameters
Alarm parameters include the allowable bit errors per second threshold and
alarm duration.
SC
Set Clearing
Sets the alarm self-clearing function to either enable or disable.
SD
Set Date
Sets date or verifies current date.
ST
Set time
Sets time or verifies current time.
T x Test
Initiates the T1 carrier test function. To terminate a test in process, enter the
STOP TEST (S) command at any time.
MMI commands can now be executed. There are seven basic commands
that can be combined together to form a total of 19 command sets. They are:
•
Alarm
•
Clear
•
Display
•
Set
•
Test
• Help
•
Quit
If ?<CR> is typed, the MMI lists the above commands along with an
explanation of their usage. A screen similar to the following appears. The
help screen also appears by typing H<CR>,orHELP<CR>.
ALARM
USAGE: Alarm [Enable | Disable]
CLEAR
USAGE: Clear [Alarm] | [Error counter] [Log]
DISPLA
Y
USAGE: Display [Alarm | Status | Perform | History] [Pause]
HELP
USAGE: Help | ?
SET
USAGE: Set [Time | Date | Alarm | Clearing | Name | Memory]
TEST USAGE: Test [Carrier All]
QUIT USAGE: Quit
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.