Enterprise Edge Telephone Feature Card © 1999 Nortel Networks P0908931 Issue 01
Using Enterprise Edge features Using an Enterprise Edge feature 1. Press ƒ and enter the desired feature code on the dial pad. or Press a programmed memory button. 2. Follow the display messages. On a two-line display telephone, some features are also available on display buttons. Programming You can program memory buttons for one-touch access to frequently used features. memory buttons 1. Press ƒ•‹. 2. Press the memory button that you want to program. (This step is not necessary on the M7100 telephone.
Call Queuing ƒ°‚⁄ Answer the next call. If more than one call is waiting, priority is given to incoming external calls over callback, camped, or transferred calls. Camp-on ƒ°¤ Re-route a call to another telephone even if all its lines are busy. Press ƒ°¤, then dial the extension number of the receiving telephone. Class of service password Conference ƒfl° Change the dialing filters on a line or telephone, or gain external access to your system. Dialing filters determine which numbers you can dial.
Automatic Dial: Dial the number without choosing a line button first. Your prime line is automatically selected for the call. Pre-Dial: Dial the number, then press a line button to place the call. Edit the number by pressing √ before placing the call. Do Not Disturb ƒ°fi Group Listening ƒ°‚¤ Hold ˙ Cancel ƒ£°fi When you are not on a call prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.
Messages ƒ⁄ Cancel ƒ£⁄ Send a message to an Enterprise Edge telephone’s display to have someone call you back. To view and reply to your messages: 1. Press ƒflfi. 2. Press • and £ to view your message list. 3. Press ‚ to call the person who left you the message. To erase a message: 1. Press ˙ while viewing a message. Moving line buttons ƒ•°⁄ Name and number blocking Page ƒ•°⁄· Change the position of your line or hunt group buttons. 1. Press ƒ•°⁄. 2. Press the line button that you want to move. 3.
Privacy ƒ°‹ Change the privacy setting for an external line. If a line normally has privacy, this permits another telephone that shares the line to join your call by selecting the line while you are using it. If a line normally has privacy disabled, this prevents another telephone that shares the line from joining your call by selecting the line while you are using it. The privacy setting is re-established once you end your call or when you enter the Privacy feature code again.
ƒ°‡‹ Cancel ƒ£°‡‹ Turn on one of six services for routing on particular lines or telephones from a designated control telephone. You will be required to enter the System Coordinator password. Speed Dial ƒ‚ Dial an external telephone number using a two-digit code. There are two types of speed dial codes: system (01 to 70) and personal (71 to 94). System speed dial codes can be used from any Enterprise Edge telephone in the system. They are assigned by your system coordinator.
Voice call deny Wait for dial tone ƒ°° Cancel ƒ£°° Prevent your telephone from receiving voice calls. Do Not Disturb (ƒ°fi) also prevents your telephone from receiving voice calls. ƒ°‚› Program in an external autodial number to cause the system to wait to receive dial tone ‡ from another system before proceeding with the dialing sequence. Call Display Services The following features are available only if you subscribe to Call Display services from your local telephone company.
