Network Adapter Troubleshooting Reference Guide

600r server 51

MNR A minor system fault is an error or event that

has little impact on system operation. The

system continues to operate.

PWR A power supply fault indicates that one of the

power supplies is not providing power. The

MJR LED is also lit.

External LEDs

Description Information

MPB96 DS30 link LEDs (three green LEDs

located on the card bracket and visible from the

back of the server)

When these LEDs are on, all three DS30

connections are working properly and the

cables are connected correctly. If one or more

LEDs are off, one of the following conditions is

present:

•

One or more connections to the switch

are interrupted. Check each of the three

branches of the DS30 cable for faults, or

replace the cable.

•

An MGate card in the switch is defective.

NIC LEDs Each network interface card (NIC) has two

LEDs:

•

The upper LED shows that the network

cable is connected.

•

The lower LED blinks to indicate data

transfer.

Power supply LED The power supply has its own LED:

•

OFF = system or power supply is off or

faulty

•

Red/Amber = power supply is faulty or

cable is disconnected

•

Green = power supply is working correctly

and powered on

Nortel CallPilot

Troubleshooting Reference Guide

NN44200-700 01.05 Standard

5.0 26 June 2007