Telephone System Installation and Maintenance Guide

5
BCM50 Installation and Maintenance Guide
Task List
Determining DHCP server configuration and IP address . . . . . . . . . . . . . 67
To disable the DHCP server on the main unit ...............................................................69
Installing the main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
To install the rackmount shelf in an equipment rack .....................................................81
To install the BCM50 unit on the rackmount shelf .........................................................82
To install a BCM50 unit on top of another unit ..............................................................83
To install the power supply on the rackmount shelf.......................................................83
To install the patch panel (optional)...............................................................................83
To install the BCM50 wallmount bracket .......................................................................84
To install the BCM50 unit on the wallmount bracket .....................................................86
To install the WFC .........................................................................................................88
To install the BCM50 unit on a desktop or shelf ............................................................89
Installing an expansion unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
To set GASM dip switches ............................................................................................94
To set GATM dip switches.............................................................................................94
To install a media bay module (MBM) ...........................................................................95
Connecting the cables to the BCM50 system . . . . . . . . . . . . . . . . . . . . . . 97
To connect an expansion unit........................................................................................99
To connect a power supply using a UPS.....................................................................101
To connect a power supply without a UPS..................................................................101
To connect the lines and extensions ...........................................................................104
To connect telephone lines to DTM, BRIM, or 4x16 MBMs.........................................105
To connect analog telephone lines to the GATM4 or GATM8.....................................106
To connect extensions to DSM16, DSM32, ASM8, or 4x16 MBMs.............................106
To install an auxiliary ringer.........................................................................................108
To install an external paging system ...........................................................................108
To connect the music source using the music source jack .........................................110
To connect the music source using the RJ-21 telephony connector ...........................110
To connect the cables to the wiring field card (optional) .............................................111
To connect the cables to the patch panel (optional)....................................................111
Installing telephones and peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
To install the emergency telephone.............................................................................114
Installing the analog terminal adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
To connect the ATA2...................................................................................................119
To mount the ATA2 on a wall ......................................................................................119
To measure the insertion loss from the CO to the analog device................................120
To measure the insertion loss from the analog device to the CO................................121
Configuring the BCM50 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Using Telset Administration to set the basic parameters . . . . . . . . . . . . 127
To enter the keycodes .................................................................................................128