Telephone System Installation and Maintenance Guide

Chapter 14 Using Element Manager to set the basic parameters 137
BCM50 Installation and Maintenance Guide
4 Configure the attributes on the Quick Install Wizard form (see Table 24).
5 Click Install.
Configuring the startup parameters
Use the following procedures to configure the startup parameters for the BCM50 using Element
Manager:
• “To enter a name for your system”
• “To configure the date and time settings” on page 138
• “To configure DHCP server settings” on page 138
• “To configure IP Phones” on page 139
• “To configure SNMP settings” on page 140
• “To configure SNMP community strings” on page 140
• “To configure the SNMP manager list” on page 141
• “To create user accounts” on page 141
To enter a name for your system
1 From the Configuration tab, click the System folder to expand it.
2 Select Identification from the System folder.
3 Enter a name for your system in the System name field.
Table 24 Quick Install Wizard attributes
Attribute Description
Attendant DN Enter the extension number of the attendant or operator assigned to CallPilot.
Primary UI Style Select the mailbox user interface used as a default for the mailboxes.
If you select NVM, the mailbox user interface uses Norstar voice mail voice and text
prompts.
If you select CallPilot, the mailbox user interface uses CallPilot voice and text
prompts.
Primary Language Select the language used as the primary language for the mailboxes.
From Line Enter the line number of the first line in the range of lines you want CallPilot to
answer. CallPilot answers the range of lines between this line and the line you
enter in the To Line box.
To Line Enter the line number of the last line in the range of lines you want CallPilot to
answer.
Number of rings Enter the number of rings you want CallPilot to wait before answering lines.