BayStack User Guide

BayStack 350 10/100/1000 Series Switches
304376-B Rev 00
1-63
In the configuration example shown in Figure 1-42 on page 1-62, the designated
monitor port (port 23) can be set to monitor traffic in any of the following modes:
• Monitor all traffic received by port X.
• Monitor all traffic transmitted by port X.
• Monitor all traffic received and transmitted by port X.
• Monitor all traffic received by port X or transmitted by port Y.
• Monitor all traffic received by port X (destined to port Y) and then
transmitted by port Y.
• Monitor all traffic received/transmitted by port X and received/transmitted
by port Y (conversations between port X and port Y).
As shown in the Port Mirroring Configuration screen example (Figure 1-43
), a
user has designated port 23 as the Monitor Port for ports 24 and 25 in switch S1.
The Monitoring Mode field [ - > Port X or Port Y - > ] indicates that all traffic
received by port X or all traffic transmitted by port Y is currently being monitored
by the StackProbe attached to Monitor Port 23.
The screen data displayed at the bottom of the screen shows the currently active
port mirroring configuration.
kombk.book Page 63 Thursday, February 18, 1999 10:59 AM