BayStack User Guide

Using the BayStack 350 10/100/1000 Series Switch
3-70
304376-B Rev 00
Software Download
The Software Download screen (Figure 3-31) allows you to revise the BayStack
350 switch software image that is located in nonvolatile flash memory. To
download the BayStack 350 switch software image, a properly configured Trivial
File Transfer Protocol (TFTP) server must be present in your network, and the
switch must have an IP address. (See “IP Configuration” on page 3-7
to learn how
to configure the switch’s IP address.)
Choose Software Download (or press f) from the main menu to open the Software
Download screen.
You can monitor the software download process by observing the BayStack 350
switch LEDs (see “
LED Indications During the Download Process” on
page 3-72
).
Caution:
Do not interrupt power to the device during the software download
process. If the power is interrupted, the firmware image can become corrupted.
Achtung:
Unterbrechen Sie die Stromzufuhr zum Gerät nicht, während die
Software heruntergeladen wird. Bei Unterbrechung der Stromzufuhr kann das
Firmware-Image beschädigt werden.
Attention:
Ne pas couper l'alimentation de l'appareil pendant le chargement
du logiciel. En cas d'interruption, le programme résident peut être endommagé.
Precaución:
No interrumpa la alimentación del dispositivo durante el
proceso de descarga del software. Si lo hace, puede alterar la imagen de la
programación (firmware).
kombk.book Page 70 Thursday, February 18, 1999 10:59 AM