BayStack User Guide

Using the Console Interface
304376-B Rev 00
3-57
Attenzione:
Nel caso in cui si scelga una velocità di trasmissione non
corrispondente a quella del terminale della console, la comunicazione con
l'interfaccia della console cadrà premendo il tasto [Invio]. Se la comunicazione
cade, impostare il terminale della console in modo tale che corrisponda alla
nuova impostazione della porta di servizio.
Console Password
Enables password protection for accessing the console interface (CI) through a
TELNET session, a console terminal, or both.
If you set this field to Required, you can use the Logout option to restrict access
to the CI. Thereafter, you will need to specify the correct password at the
console-terminal prompt.
See
Console Read-Only Password and Console
Read-Write Password for more information.
Default Value: Not Required
Range: Not Required, Required for TELNET, Required for Console,
Required for Both
Console Read-Only
Password
When the Console Password field is set to Required (for TELNET, for Console, or
for Both), this field allows read-only password access to the CI. Users can
access the CI using the correct password (see Default Value:), but cannot
change any parameters or use the Reset option or Reset to Default option.
Default Value: user
Range: An ASCII string of up to 15 printable characters
(continued)
Table 3-22. Console/Comm Port Configuration Screen Fields (continued)
Field Description
kombk.book Page 57 Thursday, February 18, 1999 10:59 AM