BayStack User Guide

Using the Console Interface
304376-B Rev 00
3-7
IP Configuration/Setup
The IP Configuration/Setup screen (Figure 3-3) allows you to set or modify the
BayStack 350 switch IP configuration parameters. Data that you enter in the
user-configurable fields takes effect as soon as you press Enter.
To open the IP Configuration/Setup screen, choose IP Configuration/Setup
(or press i) from the main menu.
When you select this option, the switch resets, runs a self-test, then displays the
Bay Networks logo screen. Press [Ctrl]-Y to access the BayStack 350 Main
Menu.
Logout
The Logout option allows a user in a TELNET session or a user working at a
password-protected console terminal to terminate the session (see “
Logout” on
page 3-82
).
Note:
The read-only fields in this screen are updated based on the BootP mode
specified in the BootP Request Mode field. (See “
Choosing a BootP Request
Mode” on page 3-9 for more information.)
Table 3-1. Console Interface Main Menu Options (continued)
Option Description
kombk.book Page 7 Thursday, February 18, 1999 10:59 AM