BayStack User Guide

Using the BayStack 350 10/100/1000 Series Switch
2-16
304376-B Rev 00
Figure 2-11. Bay Networks Logo Screen
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 350 Main Menu, press [Ctrl]-Y.
Initial Setup of the BayStack 350 Switch
In most cases the BayStack 350 switch can be installed and made operational
using the system default settings (see Appendix E, “Default Settings” for a list of
default setting for the BayStack 350 switch).
Note:
The Bay Networks logo screen for your switch will display the correct
model number and the current hardware, firmware, and software versions.
***********************************************
* Bay Networks,Inc. *
* Copyright (c) 1996,1998,1999 *
* All Rights Reserved *
* BayStack 350- XX T *
* Versions: HW:Rev x FW:V x . xx SW:V x . x.x.x *
***********************************************
Enter Ctrl-Y to begin.
kombk.book Page 16 Thursday, February 18, 1999 10:59 AM