Owner manual

5 Refer to “Installing an MDA” on page 7 for instructions on

installing the replacement MDA

Connecting fiber cables

The OC-12c/STM-4 MDA uses duplex SC connectors

(Figure 14), and the OC-3c/STM-1 MDA uses

MT-RJ connectors (Figure 15).

Figure 14 OC-12c/STM-4 MDA duplex SC connector with

dust caps

Note: If you do not plan to install a replacement MDA,

place the slot cover on the MDA slot and tighten the 2

screws.

9879FA