Passport Module User Guide

Chapter 6 Configuring the Passport 8672ATME Module 135
Using the Passport 8672ATME Module
Figure 59 OSPF tab
Table 48 describes the OSPF tab fields.
Table 48 OSPF tab fields
Field Description
Enable Enables or disables OSPF routing on the specified interface
HelloInterval Length of time, in seconds, between the Hello packets that the
router sends on the interface. This value must be the same for
all routers attached to a common network.
RtrDeadInterval Number of seconds that a router’s Hello packets have not been
seen before its neighbors declare the router down.
DesigRtrPriority Priority of this interface. Used in multi-access networks, this
field is used in the designated router election algorithm. The
value 0 signifies that the router is not eligible to become the
designated router on this particular network.
Metric Metric for this type of service (TOS) on this interface. The
default value of the TOS 0 Metric is (10^9 / ifSpeed). The value
FFFF means “no route via this TOS.”
AuthType Authentication type specified for an interface. Additional
authentication types may be assigned locally.