Owner's manual

Installing the Breaker Interface Panel for the Ethernet Routing Switch 8010co Chassis

Chapter 2

Installation

This chapter describes how to install the breaker interface panel and covers the

following topics:

• “Preparing to install the breaker interface panel” next

• “Installing the breaker interface panel” on page 36

• “Verifying the installation” on page 62

Preparing to install the breaker interface panel

Before begin the installation, verify that:

• Your shipment is complete and undamaged.

• You have the cables, tools, and other equipment that you need.

• Your installation site meets the physical, electrical, and environmental

requirements (see Appendix A, “Technical specifications,” on page 73).

The sections that follow help you prepare for installation.

Note: For a list of requirements that must be met for the 8010co chassis,

see the appropriate product chassis installation manual.