User Manual IP Centrex Telephone 7210, 7220

Tone Commander 7210/7220 User Manual 75
SPDIAL (Speed Dial) ........................................... page 37
PAUSE (Dialing Pause)
FA (Feature Activator)
UNUSED
MODE (Terminal Mode – National ISDN only) .............. page 38
CACH (Call Appearance Call Handling EKTS)
BASIC (Basic EKTS – National ISDN only)
VA (Voice Announce) .................................................. page 39
KEYS (CA/DN Keys that accept VA Calls)
DNs (Incoming Directory Numbers)
ALERT (Incoming Call Alerting Patterns)
MUTE (Automatic Microphone Muting)
PARAM (ISDN Parameter Download– Nat. ISDN only) . page 42
START (Start Update)
AUTO (Automatic Update Enable/Disable)
QoS (Quality of Service Options) ................................... page 43
L2 (Layer 2 801.2Q)
OFF/ON
PRIORITY
VOICE
SIGNAL
ID (VLAN ID)
L3 (Layer 3 DiffServ)
VOICE
SIGNAL
CODECS
G.711/10ms
G.711/20ms
G.711/30ms
G729A/20ms
G.723/30ms
ENABLE/ DISABLE
JTR (Jitter Buffer Delay)
PASSWD (Installation Options Password) .................... page 43
SET
CLEAR
RESET (Reset to Default Settings) ............................... page 45