Cordless Telephone User Guide

93
Other call features
Other call features
This section describes some of the call features available on your WLAN Handsets
6120 and 6140.
Use Call Page Connect to make an announcement
Use the Call Page Connect feature to make an announcement over a paging system.
Note: A Page key on an attendant console overrides and disconnects the telephones.
The telephones must reaccess the Page trunk.
To connect to Call Page:
1. While the handset is in standby mode,
enter the Page Trunk Access Code to
complete the connection to the page
system.
2. Make your announcement.
To disconnect Call Page: 3. Press the End button.
Use Centrex/Exchange Switchhook Flash
Use the Centrex/Exchange Switchhook Flash feature during an established call to use
a Centrex service, such as Call Transfer or Three-Way Calling.
To use Centrex/Exchange Line
Switchhook Flash:
1. While in a call, press the Line button to
access the Feature Keys menu.
2. Press the number that corresponds to the
Centrex Switchhook Flash feature.
A special dial tone sounds.
3. Enter the codes for your custom
Centrex feature.
4. Press the End button.