Cordless Telephone User Guide

While on an active call

This section describes the features that are available during an active call.

Place a call on hold

Use the Hold feature when talking on one line and another call arrives on a second

line. Retain the original call by placing it on hold and then answer the second call.

To place a call on hold:

To activate the Hold function, press

FCN and select the Hold soft key. The

number that corresponds to the line on

hold flashes in the upper display area.

If Automatic Hold is enabled, the

active call is automatically placed on

hold when you answer the second call.

To retrieve a call on hold:

1. Press the Line button plus the line

number of the call that you wish to

retrieve to access the Feature Keys

menu in the active (off-hook) state.

2. Press Enter.

Transfer a call

Use the Transfer feature to redirect a call to the appropriate person.

To use the Transfer feature to direct

a call to a third party:

1. Select the Transfer soft key.

2. Enter the DN to which the call is being

transferred.

3. When the number rings or a person

answers, press the Transfer soft key

again to talk.