SpeedTouchTM608WL and SpeedTouchTM620 only SpeedTouchTM608(WL)/620
Table Of Contents
- Contents
- About this IPSec Configuration Guide
- 1 IPSec: Concept for secure IP connections
- 2 SpeedTouch™ IPSec terminology
- 3 Configuration via Local Pages
- Prerequisites
- IPSec Web Pages
- VPN Menu
- In this section
- 3.1 LAN to LAN Application
- Reference network
- Selecting the LAN to LAN application
- Outline of a configuration procedure
- 3.1.1 Remote Gateway Address Known Page
- VPN context
- Initial page
- Buttons
- Remote Gateway
- Miscellaneous
- IKE Security Descriptors
- Page layout with additional Descriptors
- Page layout for pre- shared key authentication
- IKE Authentication with Preshared Key
- Page layout for certificate authentication
- IKE Authentication: Certificate parameters
- Example of a completed page
- Buttons
- 3.1.2 Remote Gateway Address Unknown Page
- VPN context
- Example
- Aggressive Mode initial page
- Aggressive Mode versus Main Mode
- Buttons
- Miscellaneous
- IKE Security Descriptors
- Page layout with additional Descriptors
- Page layout for pre- shared key authentication
- IKE Authentication with Preshared Key
- Page layout for certificate authentication
- IKE Authentication: Certificate parameters
- Main Mode initial page
- Buttons
- IKE Security Descriptors
- Page layout with additional Descriptors
- Miscellaneous
- Page layout for pre- shared key authentication
- IKE Authentication with Preshared Key
- Page layout for certificate authentication
- IKE Authentication: Certificate parameters
- Main mode expanded page
- Identification & Interface
- Example of a completed page
- Buttons
- 3.1.3 Connections Page
- 3.2 VPN Client
- VPN context
- Advantages of the SpeedTouch™ VPN Client
- Selecting the VPN Client application
- Outline of a VPN Client configuration procedure
- 3.2.1 VPN Client Page
- Initial page
- Buttons
- Server IP Address or FQDN
- Backup Server IP Address or FQDN
- IKE Security Descriptor
- IPSec Security Descriptor
- Exchange Mode
- Server Vendor
- Primary Untrusted Physical Interface
- Virtual IP mapping
- Optional Remote network
- Page layout for pre- shared key authentication
- IKE Authentication with Preshared Key
- Page layout for certificate authentication
- IKE Authentication: Certificate parameters
- Starting and stopping a VPN client connection
- Page layout for Automatic Start
- Local LAN IP Range
- Set of Server Vendor specific parameters
- Configuring XAuth
- 3.2.2 Starting the VPN Client Connection
- 3.2.3 Closing a Connection
- 3.3 VPN Server
- VPN context
- Selecting the VPN Server application
- Outline of a VPN server configuration procedure
- 3.3.1 VPN Server Page
- Initial page
- Buttons
- Local Trusted Network
- Page layout with additional Networks
- IKE Security Descriptor
- Page layout with additional Descriptors
- IPSec Security Descriptor
- Page layout with additional Descriptors
- Miscellaneous
- VPN Server settings
- Page layout for pre- shared key authentication
- IKE Authentication with Preshared Key
- Page layout for certificate authentication
- IKE Authentication: Certificate parameters
- Authorized Users List
- 3.4 Certificates
- 3.5 Advanced VPN Menu
- When to use
- Peer Profiles page
- Connection Profiles page
- 3.5.1 Peer Profiles Page
- 3.5.2 Authentication Page
- 3.5.3 Peer Descriptors Page
- 3.5.4 Peer Options Page
- 3.5.5 VPN-Client Page
- 3.5.6 VPN-Server Page
- 3.5.7 VPN-Server-XAuth Page
- 3.5.8 Connection Profiles Page
- 3.5.9 Networks Page
- 3.5.10 Connection Descriptors Page
- 3.5.11 Connection Options Page
- 3.5.12 Client Page
- 4 Configuration via the Command Line Interface
- In this chapter
- Reference network
- 4.1 Basic IPSec configuration procedure
- 4.2 Peer: Authentication Attribute
- 4.3 Peer Security Descriptor
- 4.4 Peer
- What is ...
- How is it used
- In this section
- 4.4.1 Peer parameters
- Parameters table
- Peer name [name]
- Remote Security Gateway identifier [remoteaddr]
- Backup remote Security Gateway Identifier [backupaddr]
- Exchange mode [exchmode]
- Local Identifier [localid]
- Remote Identifier [remoteid]
- Physical Interface [phyif]
- Peer descriptor [descr]
- Authentication Attribute [auth]
- client/server
- options
- 4.4.2 List all peer entities
- 4.4.3 Create a new peer entity
- 4.4.4 Set or modify the peer parameters
- 4.4.5 Delete a Peer entity
- 4.5 Connection Security Descriptor
- 4.6 Network Descriptor
- 4.7 Connection
- 4.8 Auxiliary Commands
- 4.9 Organisation of the IPSec Command Group
- 5 Troubleshooting SpeedTouch™ IPSec
- 6 Advanced Features
- In this section
- 6.1 IPSec and the Stateful Inspection Firewall
- 6.2 Surfing through the VPN tunnel
- 6.3 Extended Authentication (XAuth)
- 6.4 VPN Client
- 6.5 VPN Server
- 6.6 XAuth Users Pool
- Introduction
- 6.6.1 XAuth Pool parameters
- 6.6.2 Create a new XAuth pool
- 6.6.3 Modify the xauthpool type
- 6.6.4 Attach the xauthpool entity to the vpnserver entity
- 6.6.5 Delete an xauthpool entity
- 6.6.6 XAuth User parameters
- 6.6.7 Create a new XAuth user
- 6.6.8 Set or modify the password of an XAuth user
- 6.6.9 Delete an xauthuser entity
- 6.7 The Default Peer Concept
- 6.8 One Peer - Multiple Connections
- 6.9 Peer Options
- 6.10 Connection Options
- 6.11 Advanced Connection
- Need more help?
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
75
3.5 Advanced VPN Menu
When to use The Advanced VPN menu gives access to two main pages where the complete
IPSec configuration can be done. These pages are component-oriented, as opposed
to the application-oriented pages described in sections 3.1, 3.2 and 3.3. Component-
oriented means that a number of components are constructed and subsequently
combined.
Configuring an operational IPSec connection basically consists of the definition of a
Peer Profile and a Connection Profile. The Peer represents the remote Security
Gateway and all the parameters required to set up an IKE Security Association to
this Security Gateway. A Connection represents the IPSec connection and all its
associated parameters.
All parameters of an IPSec configuration can be adjusted, so the functionality of
these Web pages corresponds to the Command Line Interface (CLI). Choices have to
be made in accordance to the data known to the user, and the VPN layout.
It is highly recommended to use the application-oriented Web pages for
VPN configurations. Only in exceptional cases, these pages will not be
sufficiently flexible to fulfil your requirements. Only in these cases, the
Advanced VPN menu should be used.
!
The Advanced VPN menu should be used by skilled persons only, as these
pages allow you to manually adjust configuration components that are in
general automatically generated by the SpeedTouch™. Therefore, take care
when altering settings in the Advanced VPN menu.