Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference  79
216383-D October 2005
 VRRP specifies the virtual router ID and IP address of the IP interface configured for high
availability or active–active.
 Actions provides the following two options:
 Delete deletes the selected bridge.
 Modify provides a form to modify the selected bridge.
 Add New Bridge (see Network/Bridges Add New Bridge form on page 79).
Network/Bridges Add New Bridge form
Use the Network/Bridges Add New Bridge form to add a new bridge to the configuration.
Figure 52 Network/Bridges Add New Bridge form
Fields and buttons on the Network/Bridges Add New Bridge form are as follows:
 General Settings
 Identifier provides a list to select a numerical ID, between 1 and 25, for the bridge.
 Status provides a list to select enabled or disabled for bridge status.
 IP Address1 provides an entry field to specify real IP address #1 for the bridge.
 IP Address2 provides an entry field to specify real IP address #2 for the bridge.
 Subnet Mask provides an entry field to specify the subnet mast for the bridge.
 Bridge Ageing Time provides an entry field to specify the bridge ageing time in
seconds.
 Vlan Id specifies the numerical ID, between 0 and 4094, for the VLAN.