Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference  75
216383-D October 2005
 Modify (only visible if interfaces are present) is used to modify a displayed interface
(see Network/Interfaces Modify form on page 75).
 Delete (only visible if interfaces are present) is used to delete an interface from the
system.
 Add New Interface adds a new interface to the configuration (see Network/Interfaces Add
New Interface form on page 77).
Network/Interfaces Modify form
Use the Network/Interfaces Modify form to modify interfaces.
Figure 49 Network/Interfaces Modify form
Fields and buttons on the Network/Interfaces Modify form are as follows:
 General Settings
 Identifier provides a list to select a numerical ID, between 1 and 255, for the interface.
 Status provides a list to enable or disable the interface operation.
 Management provides a list to enable or disable management through the interface.
 IP Address 1 provides an entry field to specify the IP address for the interface of the
Firewall host 1.
 IP Address 2 provides an entry field to specify the IP address for the interface of the
Firewall host 2.