Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference  67
216383-D October 2005
Network/Routes/OSPF/Redistribute form
Use the Network/Routes/OSPF/Redistribute form to display and modify the OSPF
Redistribution settings (see Network/Routes/OSPF/Redistribute form).
Figure 41 Network/Routes/OSPF/Redistribute form
Fields and buttons on the Network/Routes OSPF/Redistribute form are as follows:
 OSPF Redistribution displays the following three settings:
 Connected
 Static
 Default Gateway
 Enabled
 Yes indicates that the setting is enabled.
 No indicates that the setting is disabled.
 Metric is the numeric value used by OSPF for all redistributed routes.
 Metric Type is the OSPF exterior metric type for redistributed routes.
 RMAP is the OSPF Connected Redistribute RMAP number.
 Action provides the following selection:
 Modify provides a form to modify the connected route redistribution (see
Network/Routes/OSPF/Redistribute Modify form on page 68).