Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference  59
216383-D October 2005
Network/Routes/OSPF forms
Following are the categories of Network/Routes/OSPF forms:
 General (see Network/Routes/OSPF/General form)
 Area Indexes (see Network/Routes/OSPF/Area Indexes form on page 60)
 Interfaces (see Network/Routes/OSPF/Interfaces form on page 62)
 GRE Tunnels (see Network/Routes/OSPF/GRE Tunnels form on page 64)
 Redistribute (see Network/Routes/OSPF/Redistribute form on page 67)
Network/Routes/OSPF/General form
Use the Network/Routes/OSPF/General form to view and change the dynamic routing settings
for OSPF (see Network/Routes/OSPF/General form).
Figure 34 Network/Routes/OSPF/General form
Fields and buttons on the Network/Route/OSPF/General form are as follows:
 Status displays a list with the following selections:
 Disabled disables OSPF.
 Enabled enables OSPF.
 Spf Interval provides an entry field to set the time interval, in seconds, between each
calculation of the Shortest Path First (SPF).
 Spf Hold Time provides an entry field to set the minimum time OSPF retains a shortest-
path calculation result to prevent another calculation from occurring too soon.