Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference  55
216383-D October 2005
Fields and buttons on the Network/Routes/Static form are as follows:
 Destination IP specifies the IP address of the route destination. TIP: Use dotted decimal
notation.
 Destination Mask specifies the subnet mask for the route destination. TIP: Use dotted
decimal notation.
 Gateway IP specifies the IP address of the gateway. TIP: Use dotted decimal notation.
 Actions provides two choices, which are visible only if routes are present:
 Delete, to delete a route from the system.
 Modify, to modify the parameters of a displayed route (see Network/Routes/Static
Modify Route form).
 Add New Route adds a new route to the configuration (see Network/Routes/Static Add
Route form on page 56).
Network/Routes/Static Modify Route form
Use the Network/Routes/Static Modify Route form to modify the parameters of a displayed
route.
Figure 30 Network/Routes/Static Modify Route form
Fields and buttons on the Network/Routes/Static Modify Route form are as follows:
 Destination IP specifies the IP address of the route destination. TIP: Use dotted decimal
notation.
 Destination Mask specifies the subnet mask for the route destination. TIP: Use dotted
decimal notation.
 Gateway IP specifies the IP address of the gateway. TIP: Use dotted decimal notation.
 Update submits the changes to the pending configuration.