Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
46  Browser-Based Interface forms reference
216383-D October 2005
 Management Station IP provides an entry field to specify the IP address of the Check
Point SmartCenter Server where the Firewall log messages are sent.
 Minimum Severity provides a list that specifies the severity of messages logged and sent
to the ELA service.
 emerg
 alert
 crit
 err
 warning
 notice
 info
 debug
 Management Station DN is the designated name of the Check Point SmartCenter Server.
 Update submits the form changes to the pending configuration.
Pull SIC Certificate displays the following fields:
 Firewall Director IP provides a list to specify the IP address of the individual Firewall for
update. TIP: Do not use the MIP address.
 OPSEC Application Name is the name of the ELA service configured on the Check Point
SmartCenter Server. Use the name specified when creating the OPSEC application in the
Check Point SmartDashboard. TIP: Use a different OPSEC application for each Firewall.
 OPSEC Password is the password used to configure the ELA service on the Check Point
Management Station.
 OPSEC Password (again) is used to verify the password.
 Submit is used to submit the form and update the certificate on the specified Firewall.