Network Card User Guide

Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference  139
216383-D October 2005
The Administration/RADIUS form is divided into the following two sections:
 General
 RADIUS Servers
Fields and buttons on the form are as follows:
 General
 Status provides a list with the following two selections:
o Enabled enables RADIUS authentication of system users.
o Disabled disables RADIUS authentication of system users. TIP: Disabled is the
default setting.
 Timeout provides an entry field to specify a timeout value, in seconds, for a
connection request to a RADIUS server. TIP: The default timeout value is 10
seconds.
 Fallback specifies the desired fallback mode and provides a list with the following
two selections:
o Enabled specifies that local passwords are used as fallback if the RADIUS
servers are unreachable. TIP: Enabled is the default parameter.
o Disabled fallback mode specifies that local passwords cannot be used as fallback
if the RADIUS servers are unreachable.
 Update submits the settings to the pending configuration.
 RADIUS Servers
 IP Address specifies the IP address of the RADIUS server.
 Port specifies the TCP port of the RADIUS server.
 Actions
o Modify provides a form for modifying the selected RADIUS server.
o Delete deletes the selected RADIUS server.
 Add New Server provides a form for adding a new RADIUS server (see
Administration/RADIUS Add RADIUS Authentication Server form on page 140).