User Guide

40 Conﬁguration

>> Administrative Applications# https

(Optional) From the HTTPS access menu, designate a port for

HTTPS access using the port command.

>> HTTPS# port <port_number>

Using a port other than 4443 requires the user to designate the port

when accessing the BBI. For example, if the device IP address is

192.168.0.3 and the designated port is 465, the device is accessed

from the browser as: https://192.168.0.3:465.

(Optional) From the HTTPS access menu, enable BBI access using

the ena command.

>> HTTPS# ena

(Optional) Finalize the changes using the apply command.

>> HTTPS# apply

—End—

Applying the Nortel SNAS license

The Nortel SNAS ships with support for up to 200 authenticated user

sessions. To support additional users on your Nortel SNAS switch, you must

obtain a Nortel SNA software license ﬁle. The software license ﬁle contains

a software license key that you must enter into the Nortel SNAS switch to

activate support for the additional users. The ﬁle can support an additional

100, 250, 500, 1000, 2000, or, 5000 users.

The following table lists the part number for the additional concurrent

endpoints.

Part Number Description

EB1639171 Secure Network Access License - Add 100 concurrent

endpoints

EB1639172 Secure Network Access License - Add 250 concurrent

endpoints

EB1639175 Secure Network Access License - Add 500 concurrent

endpoints

EB1639182 Secure Network Access License - Add 1000 concurrent

endpoints

Nortel Secure Network Access

Installation — Quick Start Switch 4070

NN47230-303 01.01 Standard

2.0 28 July 2008