User Guide

Installing an NSNA device into a rack 29

Lift the locking levers (1) on the slide rails and slide the device into

the server rack until it extends approximately 10.16 centimeters (4

inches) from the rack.

Slide the device into the server rack cabinet until the release latches

(1) lock into place. To slide the device out of the rack, press on the

release latches.

Insert the included, optional M6 screws in the front and rear of the

device (2) if moving the server rack or the rack is installed in a

vibration prone area.

Nortel Secure Network Access

Installation — Quick Start Switch 4070

NN47230-303 01.01 Standard

2.0 28 July 2008