User Guide

Installation

This chapter contains installation instructions for the Nortel Secure Network

Access Switch (NSNA).

Navigation

•

"Unpacking the device" (page 25)

•

"Installing an NSNA device into a rack" (page 26)

•

"Cabling the device" (page 30)

Unpacking the device

Unpack the shipping container to ensure the device and all accessories are

included and undamaged.

Procedure steps

Step Action

Remove the equipment from the shipping container and place the

device on antistatic material.

Check all items for damage.

ATTENTION

If the equipment is damaged, contact your Nortel sales representative.

Use the following device shipping accessories checklist to verify that

in the shipping container includes all contents.

Check

Accessory Use to

Switch Install in a 4 post server rack.

Power units Connect the units to an

appropriate and properly

grounded power source.

Network cables Connect the device.

Nortel Secure Network Access

Installation — Quick Start Switch 4070

NN47230-303 01.01 Standard

2.0 28 July 2008