User Guide

21
Installation preparation
This section provides basic information about the Nortel Secure Network
Access Switch (NSNA) 4070 and the checklist of the shipped accessories.
Navigation
•
"Safety precautions" (page 21)
•
"Installation checklist" (page 23)
Safety precautions
This section describes the safety precautions, which are vital for handling
and installation of the NSNA.
Safety precautions navigation
• "Personal safety before installing the device" (page 21)
•
"Module safety" (page 21)
•
"Cable and connector safety" (page 22)
Personal safety before installing the device
For your safety, review the following personal safety warnings before
working with the NSNA.
•
Two or more people must be involved in installing the device.
•
Use the following safe practices for lifting:
— Items between 18 and 32 kilograms (39.7 and 70.5 pounds) should
be lifted by a minimum of two people.
Module safety
Use the following general practices to prevent the equipment damage when
working with the NSNA.
•
The device must be installed in a room where the ambient temperature
is at or below 35 degrees Celsius (95 degrees Fahrenheit).
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.