DECT Handset User Guide

Configuring DECT system information

Configuring DECT system

information

Before you can make a telephone call using the DECT handset, the

handset must be subscribed to a DECT system. The handset can be

operated with a maximum of ten DECT systems.

Note: When the handset is not yet subscribed to the system, the

display shows No Subscription.

Use the System menu to perform the following tasks:

• “Subscribing the handset to a DECT system” on page 71

• “Manually selecting the DECT system” on page 73

• “Enabling automatic DECT system selection” on page 74

• “Deleting a system” on page 75

• “Editing the system name and phone number” on page 76

• “Checking the Equipment ID (IPEI)” on page 76

To carry out the following steps, you must be familiar with the use of the

handset controls; see “Handset controls” on page 13.

Accessing the System menu

Subscribing the handset to a DECT system

The handset must be subscribed to at least one DECT system before it

can be used. Ask your system administrator to subscribe your DECT

handset to a system.

1. Press the Menu soft key.

2. Press the arrow keys to scroll and highlight the

System option.

3. Press the OK soft key.

System