- Nortel Ethernet Routing Switch Owner's Manual

Appendix B Default settings 345
Field Default setting
VLAN Name VLAN # (VLAN number)
Management VLAN Yes, VLAN #1
VLAN State Inactive
Port Membership Default (all ports assigned as untagged members of
VLAN 1)
Unit
1
Port
1
Filter Untagged Frames No
Port Name Unit 1, Port 1
PVID
1
Tagging Untagged Access
Unit
1
Port
1
PVID 1 (read only)
Port Name Unit 1, Port 1 (read only)
Unit
1
Status Enabled (for all ports)
LnkTrap On
Autonegotiation Enabled (for all ports)
Speed/Duplex 100Mbs/Half (when Autonegotiation is Disabled)
Autonegotiation Enabled
Speed/Duplex 100Mbs/Half (when Autonegotiation is Disabled)
Flow Control Disabled
Trunk 1 to 6 (depending on configuration status)
Trunk Members (Unit/Port) Blank field
STP Learning Normal
Trunk Mode Basic
Trunk Status Disabled
Trunk Name Trunk #1 to Trunk #6
Traffic Type Rx and Tx
Monitoring Mode Disabled
Monitor/Unit Port Zero-length string
Unit/Port X Zero-length string
Limit
0 pps
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.