- Nortel Ethernet Routing Switch Owner's Manual

Downloading switch images 329
The following table describes the fields on the Software Download
page.
Table 146
Software Download page fields
Fields Range Description
Current Running Version The version of the current running
software.
Local Store Version The local version of the software in the
flash memory.
Software Image Filename
1..30
Type the software image file name.
Diagnostics Filename
1..30
Type the diagnostics file name.
TFTP Server IP Address XXX.XXX.XXX.XXX Type the IP address of your TFTP load
host.
Download Option No
Software Image
Diagnostics
Software Image If Newer
Download without reset
Choose the software download option.
2
Type information in the text boxes, or select from a list.
3
Click Submit.
The software download process automatically completes without
user intervention. The process erases the contents of flash memory
and replaces it with a new software image. Take care not to interrupt
the download process until after it runs to completion (the process
can take up to ten minutes, depending on network conditions).
Unless you choose the Download without reset option, the switch
automatically resets after the download process is complete. The
new software image then initiates a self-test.
During the download process, the Ethernet Routing Switch 2500
Series is not operational. You can monitor the progress of the
download process by observing the LED indications.
—End—
The following table describes the LED indications displayed during the
software download process.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.