- Nortel Ethernet Routing Switch Owner's Manual

308 Configuring ports using Device Manager
ATTENTION
When you edit multiple ports, some tabs are not available, and some tabs
are available even though the options are not applicable. When the option
does not apply for a given port, NoSuchObject is displayed.
—End—
Interface tab for multiple ports
The Interface tab shows the basic configuration and status of the selected
ports.
To view or edit the Interface tab for multiple ports, use the following
procedure:
Step Action
1
Select the ports that you want to edit.
Press Ctrl+left click the ports that you want to configure. A yellow
outline appears around the selected ports.
2
Do one of the following:
•
From the shortcut menu, choose Edit.
•
From the Device Manager main menu, choose Edit > Port.
The Interface tab shows port interface statistics.
Figure 111
Interface tab for multiple ports
—End—
Table 139 "Interface tab fields for multiple ports" (page 309) describes the
Interface tab fields for multiple ports.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.