- Nortel Ethernet Routing Switch Owner's Manual

300 Configuring the switch using Device Manager
Organizational Defined Info tab
With the Organizational Defined Info tab, you can view organizationally
specific properties for the remote system.
Use the following procedure to open the Organizational Defined Info tab:
Step Action
1
From the Device Manager menu bar, choose Edit > Diagnostics >
802.1ab > LLDP.
The LLDP dialog box appears with the Globals tab displayed.
2
Click the Organizational Defined Info tab.
The Organizational Defined Info tab appears.
Figure 109
Organizational Defined Info tab
The following table describes the Organizational Defined Info tab
fields.
Table 137
Organizational Defined Info tab fields
Field Description
TimeMark The TimeFilter for this entry.
LocalPortNum Identifies the local port on which the remote
system information is received.
Index An arbitrary local integer value used
by this agent to identify a particular
MSAP. An agent is encouraged to assign
monotonically increasing index values to
new entries, starting with one, after each
reboot.
OrgDefInfoOUI The Organizationally Unique Identifier
(OUI), as defined in IEEE 802-2001, is a 24
bit (three octets) globally unique assigned
number referenced by various standards,
of the information received from the remote
system.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.