- Nortel Ethernet Routing Switch Owner's Manual

Working with configuration files 275
Step Action
1
From the Device Manager main menu, choose Edit > File System.
The FileSystem dialog box appears with the Config/Image/Diag
tab displayed.
2
Click the Save Configuration tab.
The Save Configuration tab appears.
Figure 96
Save Config tab
The following table describes the Save Configuration tab fields.
Table 124
Save Configuration tab fields
Field Description
AutoSavetoNvramEnabled Enables or disables autosave on the switch.
Action Select the copyConfigToNvram option to save the switch
configuration to NVRAM (and click Apply).
Status This field displays the status of the copyConfigToNvram action.
Possible values are:
•
other—no action has been taken since switch boot
• inProgress—the operation is in progress
•
success—the operation succeeded
•
fail—the operation failed
—End—
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.