- Nortel Ethernet Routing Switch Owner's Manual

274 Configuring the switch using Device Manager
Figure 95
File system - ASCII Config File dialog box
Table 123 "ASCII Config File tab fields" (page 274) describes the ASCII
Config File tab fields.
Table 123
ASCII Config File tab fields
Field Description
LoadServerAddr The IP address of the load server for the ASCII configuration
file. If not used, then the value is 0.0.0.0.
ASCIIConfigFileName Name of the ASCII configuration file currently associated with
the interface. When not used, the value is a zero length string.
ASCIIConfigAutoDownload Specifies automatic ASCII configuration download.
ASCIIConfigAutodldStatus Specifies the current status of the ASCII configuration file
download.
ASCIIConfigManualDownload Specifies manual download of an ASCII configuration file.
ASCIIConfigManualdldStatus Specifies the current status of the manual download of an ASCII
configuration file.
ASCIIConfigManualUpload Specifies manual upload of an ASCII configuration file.
ASCIIConfigManualUpldStatus Specifies the current status of the manual upload of an ASCII
configuration file.
Save Configuration tab
You can use the Save Configuration tab to save the switch configuration
to NVRAM.
To open the Save Configuration tab, use the following procedure:
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.