- Nortel Ethernet Routing Switch Owner's Manual

Editing the chassis configuration 267
PowerSupply tab
The PowerSupply tab provides read-only information about the operating
status of the switch power supplies.
To open the PowerSupply tab, use the following procedure:
Step Action
1
Select the chassis.
2
From the shortcut menu, choose Edit > Chassis.
The Chassis dialog box appears with the System tab displayed.
3 Click the PowerSupply tab.
The PowerSupply tab appears.
Edit Chassis dialog box PowerSupply tab
—End—
The following table describes the PowerSupply tab fields.
Table 120
Power Supply tab fields
Field Description
Chassis
Primary
Power Supply
The operational state of the power supply. Possible values
include:
• other: Some other state.
•
notAvail: State not available.
•
removed: Component was removed.
•
disabled: Operation disabled.
• normal: State is in normal operation.
•
resetInProg: There is a reset in progress.
•
testing: System is doing a self test.
•
warning: System is operating at a warning level.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.