- Nortel Ethernet Routing Switch Owner's Manual

Editing the chassis conﬁguration 263

Field Description

BaseNumPorts The number of base ports of the switch.

TotalNumPorts The number of ports of the switch.

IPAddress The base unit IP address.

Stack Info tab

Like the Base Unit Info tab, the Stack Info tab provides read-only

information about the operating status of the stacked switches and whether

or not the default factory settings are being used.

To open the Stack Info tab:

Step Action

Open the Edit Chassis screen in the manner detailed at the

beginning of this section.

Click the Stack Info tab. This tab is illustrated in "Edit Chassis

screen -- Stack Info tab" (page 263).

Edit Chassis screen—Stack Info tab

"Stack Info tab ﬁelds" (page 263) describes the Stack Info tab ﬁelds.

Stack Info tab ﬁelds

Field Description

Descr A description of the component or

subcomponent. If not available, the value is

a zero length string.

Location

The geographic location of a component

in a system modeled as a chassis,

but possibly physically implemented

with geographically separate devices

connected together to exchange

management information. Chassis

modeled in this manner are sometimes

referred to as virtual chassis. An example

value is: 4th flr wiring closet in blg A.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007