- Nortel Ethernet Routing Switch Owner's Manual

256 Configuring the switch using Device Manager
Field Description
IpAddress The Internet Protocol address of the device used to represent a
point of attachment in a TCP/IP internetwork.
Type The type of mapping.
TCP tab
The TCP tab displays TCP information for the switch.
To open the TCP tab, use the following procedure:
Step Action
1
From the Device Manager main menu, choose Edit > IP.
The IP dialog box appears with the Globals tab displayed.
2
Click the TCP tab.
The TCP tab appears.
TCP tab
The following table describes the TCP tab fields.
Table 115
TCP tab fields
Field Description
RtoAlgorithm The algorithm used to determine the timeout value used
for retransmitting unacknowledged octets.
RtoMin The minimum value permitted by a TCP implementation
for the retransmission timeout, measured in milliseconds.
RtoMax The maximum value permitted by a TCP implementation
for the retransmission timeout, measured in milliseconds.
MaxConn The limit on the total number of TCP connections that
the entity can support. In entities where the maximum
number of connections is dynamic, this object contains
the value -1.
—End—
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.