- Nortel Ethernet Routing Switch Owner's Manual

246 Ethernet port management using the CLI
Table 105 "show auto-negotiation-capabilities command" (page
246) describes the parameters and variables for the show
auto-negotiation-capabilities command.
Table 105
show auto-negotiation-capabilities command
Parameters and values Description
port <portlist>
Enter ports for which you want the
autonegotiation capabilities displayed.
Figure 90 "show auto-negotiation-capabilities command output" (page
246) displays sample output from the show auto-negotiation-capabilities
command.
Figure 90
show auto-negotiation-capabilities command output
auto-negotiation-advertisements command
The auto-negotiation-advertisements command
configures advertisements for the switch. The syntax for the
auto-negotiation-advertisements command is:
auto-negotiation-advertisements [port <portlist>] [10-full]
[10-half] [100-full] [100-half] [1000-full]
[asymm-pause-frame] [pause-frame] [none]
The auto-negotiation-advertisements command is executed in the
Interface Configuration command mode.
Table 106 "auto-negotiation-advertisements command" (page 246) describes
the parameters and variables for the auto-negotiation-advertisements
command.
Table 106
auto-negotiation-advertisements command
Parameters and values Description
port <portlist>
Enter ports for which you want to configure
advertisements.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.