- Nortel Ethernet Routing Switch Owner's Manual

Configuring LLDP using the CLI 227
Figure 81
show lldp port neighbor command output
Figure 82 "show lldp port neighbor-mgmt-addr command output" (page
227) displays the output from the show lldp port neighbor-mgmt-addr
command.
Figure 82
show lldp port neighbor-mgmt-addr command output
ATTENTION
To display the neighbor management addresses using the show lldp port
neighbor-mgmt-addr command, you must configure the connected port of the
neighbor to transmit local management address TLVs (lldp tx-tlv [port
<portlist>] local-mgmt-addr).
Figure 83 "show lldp port rx-stats command output" (page 228) displays the
output from the show lldp rx-stats command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.