Manualshelf

- Nortel Ethernet Routing Switch Owner's Manual

ManualsBrandsNortel Networks ManualsSwitch2500 Series
221222223224225226227228229230
226 System configuration using the CLI
Figure 80
show lldp stats command output
show lldp port command
The show lldp port command displays configuration data for LLDP
ports. The syntax for the show lldp port command is:
show lldp [port <portlist>] [neighbor] [neighbor-mgmt-addr]
[rx-stats] [tx-stats] [tx-tlv]
The show lldp port command is executed in the User Exec command
mode.
Table 88 "show lldp port command parameters and variables" (page
226) describes the parameters and variables for the show lldp port
command.
Table 88
show lldp port command parameters and variables
Parameters and
variables
Description
port <portlist>
Specifies the ports affected by the command.
neighbor Displays LLDP neighbors.
neighbor-mgmt-addr Displays LLDP management addresses for neighbors.
rx-stats
Displays LLDP receive statistics.
tx-stats
Displays LLDP transmit statistics.
tx-tlv Displays LLDP transmit TLVs.
Figure 81 "show lldp port neighbor command output" (page 227) displays
the output from the show lldp port neighbor command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.