- Nortel Ethernet Routing Switch Owner's Manual

216 System configuration using the CLI
•
"default autotopology command" (page 216)
autotopology command
The autotopology command enables the Autotopology protocol. The
syntax for the autotopology command is:
autotopology
The autotopology command is executed in the Global Configuration
command mode.
The autotopology command has no parameters or values.
no autotopology command
The no autotopology command disables the Autotopology protocol. The
syntax for the no autotopology command is:
no autotopology
The no autotopology command is executed in the Global Configuration
command mode.
The no autotopology command has no parameters or values.
default autotopology command
The default autotopology command enables the Autotopology
protocol. The syntax for the default autotopology command is:
default autotopology
The default autotopology command is executed in the Global
Configuration command mode.
The default autotopology command has no parameters or values.
show autotopology settings
The show autotopology settings command displays information on
the Autotopology configuration. The syntax for the
show autotopology settings command is:
show autotopology settings
The show autotopology settings command is executed in the
Privileged EXEC command mode.
The show autotopology settings command has no parameters or
variables.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.